Sewing Machine Mistakes: Even today there are many people who are fond of sewing clothes at home. So due to inflation, there are no less people who do tailoring in the house. But it is seen many times that there is often a malfunction in the sewing machine. A special reason for this is also using the machine incorrectly. Today we tell you what things need to be kept in mind while sewing. So that the sewing machine can be saved from getting damaged.
read this also: Follow these easy steps to make mixer grinder like new
don’t care about fabric
Many people do not take care of the fabric while sewing, which can lead to machine malfunction. In fact, the fabric for different dresses is also often of different quality. For which the same type of needle is used. So at the same time some people also start sewing plastic bags or thick clothes in the machine, due to which the thread gets stuck in the machine and the needle breaks. Therefore, it is important to take care of the fabric while sewing.
poor machine maintenance
After using the sewing machine, people keep it like this. Due to not being used for a long time, it starts jamming or it starts rusting. Therefore, it is also important to take care of the machine. For this, you keep cleaning it from time to time and also keep adding oil. Even if there is no sewing work, keep using it from time to time to sew something so that it does not jam and it does not rust.
not using the right needle
You also have to pay attention to its needle so that there is no problem in the machine. Use the right needle to ensure that the machine is correct and the stitching of the fabric is also done properly. Using the wrong needle will not only spoil the sewing of the cloth, but will also damage the machine. Also make sure that the needle fits snugly in the machine and is not too loose or too tight.
don’t run for long
Many people keep running the machine for several hours simultaneously without taking a break. You should avoid this too. This causes the machine to overheat and may malfunction. To keep the machine correct, instead of running it continuously, keep taking breaks in between for some time.(Disclaimer: The information and information given in this article is based on general assumptions. Hindi news18 does not confirm the same. Please contact the relevant expert before implementing them.)